Back to Valves Information Request

Ball valves for CNG

GE2HC

High cyclicity ball valve with actuator by Gemels

High Cyclicity (1.000.000 cycles)

GE2HC series ball valves are engineered as an advanced solution for high pressure and high cyclic applications, specifically designed for the CNG sector and industrial systems requiring long-term performance. With the capability to reach up to 1,000,000 cycles, these valves ensure continuous operation and reliability even under intensive use.

Manufactured in carbon steel or stainless steel and designed to operate up to PN500, GE2HC valves are ideal for gas distribution systems, energy & gas applications, CNG automotive systems, and high-frequency industrial operations. The option to integrate pneumatic and electric actuators makes them suitable for automated systems.

Compared to the standard GE2 series, GE2HC is optimized for high cyclic performance, providing extended service life and reduced maintenance requirements.

This range is ideal for applications requiring continuous reliability, high sealing performance, and efficient management of technical fluids in energy and industrial environments.

Datasheet

Carbon Steel
Type BALL VALVE 2 WAY
Dimensions from DN6 to DN32
Technical details BSP-NPT-SAE
Pressure up to PN500
Temperature range from -20°C up to +100°C
Stainless Steel
Type BALL VALVE 2 WAY
Dimensions from DN6 to DN32
Technical details BSP-NPT-SAE
Pressure up to PN500
Temperature range from -30°C up to +100°C

General features

*On request

  • Pneaumatic actuator
  • Electrical actuator
See kit accessories
pdf ( 1.57 MB )
valvola a sfera 2vie
POS Description Q.ty Carbon Steel Stainless Steel
1 Body 1 1,0737 1,4404
2 Adapter 2 1,0460 1,4404
3 Ball 1 1,4404 1,4404
4 Stem 1 1,4542 1,4542
5 Ball seat 2 PA612G PA612G
6 Washer 1 1,0116 1,0116
7 Upper Bushing 1 POM - A1000 POM -A1000
8 Lower Bushing 1 POM - A1000 POM -A1000
9 Seeger 1 1,4301 1,4404
10 Adapter o-ring 2 NBR NBR
11 Stem o-ring 1 NBR NBR
12 Stem o-ring 1 (DN10-23) / - (DN20-25-32) NBR NBR
13 Stem Back-up 1 PTFE PTFE
14 Stem Back-up 1 (DN10-23) / - (DN20-25-32) PTFE PTFE
15 Stem quad-ring 1 NBR NBR
16 Closure gasket 2 GRAPHITE GRAPHITE
17 Screws 8 ISO 4017 8.8 ISO 4017 8.8
18 Caps 2 PVC PVC
19 Actuator 1 N/A N/A
20 Connector 1 1,0737 1,0737
21 Joint 1 1,0737 1,0737
22 Pin 1 1,0737 1,4404
Ball valve 2 way
Ball valve 2 way
Ball valve 2 way
DIN/ISO 228 BSP - BARE STEM
Item code Type DN INCH PN MPa A mm ⌀A mm ⌀A/QC mm B mm ⌀B mm B1 mm b mm C mm C-BSPP C RF mm C RTJ mm C1 mm Cavity L mm Cavity L1 mm C-D ch mm CH1 mm CS D mm D1 mm d mm ⌀d mm ØD mm Ød1 mm ⌀d/QC mm E mm ⌀E mm ⌀E linea mm E1 mm E2 mm E3 mm E4 mm E5 mm E6 mm E7 mm E8 mm E9 mm ES.V mm F mm F1 mm Flow max l/min Flow min-max l/min G mm ⌀G mm ⌀G* mm G1 mm H mm ⌀H mm H1 mm HEX mm I mm I1 mm ISO5211 J mm K mm ⌀K mm ⌀K* mm n°⌀K mm ⌀K1 mm L mm L1 mm L2 mm L3 mm L4 mm LSCH80 mm ⌀LW mm ⌀LW1 mm M mm ⌀M mm ØM1 mm N mm ⌀N mm O-ring P mm ⌀P mm Pilot Ratio Pressure cracking MPa Pressure max MPa Pressure max peak MPa Pressure max rotating MPa Pressure max static MPa Pressure max woking MPa Q mm ⌀Q mm R mm ⌀R mm ⌀RA mm S mm ⌀S mm Setting range MPa Setting standard MPa SW mm SW1 mm T mm ⌀T mm U mm V mm V1 - V2 C1 - C2GAS - MET W mm W* mm W1 mm W2 mm Weight kg X mm X* mm ⌀X mm X1 mm X-BSPP Y mm ⌀Y mm Y1 mm ⌀z mm
G590202A1301TAA GE2 G 1/4 6 50 57 24.5 73 44 11 71.3 49 F05 10 G 1/4 M6 9 50 0,505
G590203A1301TAA GE2 G 3/8 10 50 57 24.5 73 44 11 71.3 49 F05 10 G 3/8 M6 9 50 0,744
G590204A1301TAA GE2 G 1/2 13 50 57 23.5 81 48 11 71.3 49 F05 13 G 1/2 M6 9 50 1,238
G590205A1301RAA GE2 G 3/4 20 42 65 27 98 62 14 83.7 55 F05 20 G 3/4 M6 14 50 1,818
G590206A1301PAA GE2 G 1 25 42 75 33.5 106 66 14 93.6 65 F05 25 G 1 M6 14 50 2,323
G590207R1301PAA GE2 G 1 1/4 R 25 35 75 33.5 127 66 14 93.6 65 F05 25 G 1/4 M6 14 50 2,573
G590207A1301PAA GE2 G 1 1/4 32 35 87 40.75 127 83 14 93.6 80 F07 32 G 1/4 M8 14 70 2,890
Item code Type DN INCH PN MPa A mm ⌀A mm ⌀A/QC mm B mm ⌀B mm B1 mm b mm C mm C-BSPP C RF mm C RTJ mm C1 mm Cavity L mm Cavity L1 mm C-D ch mm CH1 mm CS D mm D1 mm d mm ⌀d mm ØD mm Ød1 mm ⌀d/QC mm E mm ⌀E mm ⌀E linea mm E1 mm E2 mm E3 mm E4 mm E5 mm E6 mm E7 mm E8 mm E9 mm ES.V mm F mm F1 mm Flow max l/min Flow min-max l/min G mm ⌀G mm ⌀G* mm G1 mm H mm ⌀H mm H1 mm HEX mm I mm I1 mm ISO5211 J mm K mm ⌀K mm ⌀K* mm n°⌀K mm ⌀K1 mm L mm L1 mm L2 mm L3 mm L4 mm LSCH80 mm ⌀LW mm ⌀LW1 mm M mm ⌀M mm ØM1 mm N mm ⌀N mm O-ring P mm ⌀P mm Pilot Ratio Pressure cracking MPa Pressure max MPa Pressure max peak MPa Pressure max rotating MPa Pressure max static MPa Pressure max woking MPa Q mm ⌀Q mm R mm ⌀R mm ⌀RA mm S mm ⌀S mm Setting range MPa Setting standard MPa SW mm SW1 mm T mm ⌀T mm U mm V mm V1 - V2 C1 - C2GAS - MET W mm W* mm W1 mm W2 mm Weight kg X mm X* mm ⌀X mm X1 mm X-BSPP Y mm ⌀Y mm Y1 mm ⌀z mm
G590202A2P01TAA GE2 G 1/4 6 50 57 24.5 73 44 11 71.3 49 F05 10 G 1/4 M6 9 50 0,505
G590205A2P01RAA GE2 G 3/4 20 42 65 27 98 62 14 83.7 55 F05 20 G 3/4 M6 14 50 1,818
G590206A2P01PAA GE2 G 1 25 42 75 33.5 106 66 14 93.6 65 F05 25 G 1 M6 14 50 2,323
G590207R2P01PAA GE2 G 1 1/4 R 25 35 75 33.5 127 66 14 93.6 65 F05 25 G 1/4 M6 14 50 2,573
G590207A2P01PAA GE2 G 1 1/4 32 35 87 40.75 127 83 14 93.6 80 F07 32 G 1/4 M8 14 70 2,890
disegno tecnico Gemels
ANSI/ASME B1.20.1 NPT - BARE STEM
Item code Type DN INCH PN MPa A mm ⌀A mm ⌀A/QC mm B mm ⌀B mm B1 mm b mm C mm C-BSPP C RF mm C RTJ mm C1 mm Cavity L mm Cavity L1 mm C-D ch mm CH1 mm CS D mm D1 mm d mm ⌀d mm ØD mm Ød1 mm ⌀d/QC mm E mm ⌀E mm ⌀E linea mm E1 mm E2 mm E3 mm E4 mm E5 mm E6 mm E7 mm E8 mm E9 mm ES.V mm F mm F1 mm Flow max l/min Flow min-max l/min G mm ⌀G mm ⌀G* mm G1 mm H mm ⌀H mm H1 mm HEX mm I mm I1 mm ISO5211 J mm K mm ⌀K mm ⌀K* mm n°⌀K mm ⌀K1 mm L mm L1 mm L2 mm L3 mm L4 mm LSCH80 mm ⌀LW mm ⌀LW1 mm M mm ⌀M mm ØM1 mm N mm ⌀N mm O-ring P mm ⌀P mm Pilot Ratio Pressure cracking MPa Pressure max MPa Pressure max peak MPa Pressure max rotating MPa Pressure max static MPa Pressure max woking MPa Q mm ⌀Q mm R mm ⌀R mm ⌀RA mm S mm ⌀S mm Setting range MPa Setting standard MPa SW mm SW1 mm T mm ⌀T mm U mm V mm V1 - V2 C1 - C2GAS - MET W mm W* mm W1 mm W2 mm Weight kg X mm X* mm ⌀X mm X1 mm X-BSPP Y mm ⌀Y mm Y1 mm ⌀z mm
G590902A1301TAA GE2 N 1/4 6 50 57 24.5 73 44 11 71.3 49 F05 10 N 1/4 M6 9 50 0,505
G590903A1301TAA GE2 N 3/8 10 50 57 24.5 73 44 11 71.3 49 F05 10 N 3/8 M6 9 50 0,744
G590904A1301TAA GE2 N 1/2 13 50 57 23.5 81 48 11 71.3 49 F05 13 N 1/2 M6 9 50 1,238
G590905A1301RAA GE2 N 3/4 20 42 65 27 98 62 14 83.7 55 F05 20 N 3/4 M6 14 50 1,818
G590906A1301PAA GE2 N 1 25 42 75 33.5 106 66 14 93.6 65 F05 25 N 1 M6 14 50 2,323
G590907R1301PAA GE2 N 1 1/4 R 25 35 75 33.5 127 66 14 93.6 65 F05 25 N 1/4 M6 14 50 2,573
G590907A1301PAA GE2 N 1 1/4 32 35 87 40.75 127 83 14 93.6 80 F07 32 N 1/4 M8 14 70 2,890
Item code Type DN INCH PN MPa A mm ⌀A mm ⌀A/QC mm B mm ⌀B mm B1 mm b mm C mm C-BSPP C RF mm C RTJ mm C1 mm Cavity L mm Cavity L1 mm C-D ch mm CH1 mm CS D mm D1 mm d mm ⌀d mm ØD mm Ød1 mm ⌀d/QC mm E mm ⌀E mm ⌀E linea mm E1 mm E2 mm E3 mm E4 mm E5 mm E6 mm E7 mm E8 mm E9 mm ES.V mm F mm F1 mm Flow max l/min Flow min-max l/min G mm ⌀G mm ⌀G* mm G1 mm H mm ⌀H mm H1 mm HEX mm I mm I1 mm ISO5211 J mm K mm ⌀K mm ⌀K* mm n°⌀K mm ⌀K1 mm L mm L1 mm L2 mm L3 mm L4 mm LSCH80 mm ⌀LW mm ⌀LW1 mm M mm ⌀M mm ØM1 mm N mm ⌀N mm O-ring P mm ⌀P mm Pilot Ratio Pressure cracking MPa Pressure max MPa Pressure max peak MPa Pressure max rotating MPa Pressure max static MPa Pressure max woking MPa Q mm ⌀Q mm R mm ⌀R mm ⌀RA mm S mm ⌀S mm Setting range MPa Setting standard MPa SW mm SW1 mm T mm ⌀T mm U mm V mm V1 - V2 C1 - C2GAS - MET W mm W* mm W1 mm W2 mm Weight kg X mm X* mm ⌀X mm X1 mm X-BSPP Y mm ⌀Y mm Y1 mm ⌀z mm
G590902A2P01TAA GE2 N 1/4 6 50 57 24.5 73 44 11 71.3 49 F05 10 N 1/4 M6 9 50 0,505
G590903A2P01TAA GE2 N 3/8 10 50 57 24.5 73 44 11 71.3 49 F05 10 N 3/8 M6 9 50 0,744
G590904A2P01TAA GE2 N 1/2 13 50 57 23.5 81 48 11 71.3 49 F05 13 N 1/2 M6 9 50 1,238
G590905A2P01RAA GE2 N 3/4 20 42 65 27 98 62 14 83.7 55 F05 20 N 3/4 M6 14 50 1,818
G590906A2P01PAA GE2 N 1 25 42 75 33.5 106 66 14 93.6 65 F05 25 N 1 M6 14 50 2,323
G590907R2P01PAA GE2 N 1 1/4 R 25 35 75 33.5 127 66 14 93.6 65 F05 25 N 1/4 M6 14 50 2,573
G590907A2P01PAA GE2 N 1 1/4 32 35 87 40.75 127 83 14 93.6 80 F07 32 N 1/4 M8 14 70 2,890
disegno tecnico Gemels
SAE J1926-1 - BARE STEM
Item code Type DN INCH PN MPa A mm ⌀A mm ⌀A/QC mm B mm ⌀B mm B1 mm b mm C mm C-BSPP C RF mm C RTJ mm C1 mm Cavity L mm Cavity L1 mm C-D ch mm CH1 mm CS D mm D1 mm d mm ⌀d mm ØD mm Ød1 mm ⌀d/QC mm E mm ⌀E mm ⌀E linea mm E1 mm E2 mm E3 mm E4 mm E5 mm E6 mm E7 mm E8 mm E9 mm ES.V mm F mm F1 mm Flow max l/min Flow min-max l/min G mm ⌀G mm ⌀G* mm G1 mm H mm ⌀H mm H1 mm HEX mm I mm I1 mm ISO5211 J mm K mm ⌀K mm ⌀K* mm n°⌀K mm ⌀K1 mm L mm L1 mm L2 mm L3 mm L4 mm LSCH80 mm ⌀LW mm ⌀LW1 mm M mm ⌀M mm ØM1 mm N mm ⌀N mm O-ring P mm ⌀P mm Pilot Ratio Pressure cracking MPa Pressure max MPa Pressure max peak MPa Pressure max rotating MPa Pressure max static MPa Pressure max woking MPa Q mm ⌀Q mm R mm ⌀R mm ⌀RA mm S mm ⌀S mm Setting range MPa Setting standard MPa SW mm SW1 mm T mm ⌀T mm U mm V mm V1 - V2 C1 - C2GAS - MET W mm W* mm W1 mm W2 mm Weight kg X mm X* mm ⌀X mm X1 mm X-BSPP Y mm ⌀Y mm Y1 mm ⌀z mm
G590B02A1301TAA GE2 SAE4 6 50 57 24.5 73 44 11 71.3 49 F05 10 7/16 UNF M6 9 50 0,505
G590B03A1301TAA GE2 SAE6 10 50 57 24.5 73 44 11 71.3 49 F05 10 9/16 UNF M6 9 50 0,744
G590B04A1301TAA GE2 SAE8 13 50 57 23.5 81 48 11 71.3 49 F05 13 3/4 UNF M6 9 50 1,238
G590B05A1301RAA GE2 SAE12 20 42 65 27 98 62 14 83.7 55 F05 20 1 1/16 UNF M6 14 50 1,818
G590B06A1301PAA GE2 SAE16 25 42 75 33.5 106 66 14 93.6 65 F05 25 1 5/16 UNF M6 14 50 2,323
G590B07R1301PAA GE2 SAE20R 25 35 75 33.5 127 66 14 93.6 65 F05 25 1 5/8 UNF M6 14 50 2,573
G590B07A1301PAA GE2 SAE20 32 35 87 40.75 127 83 14 93.6 80 F07 32 1 5/8 UNF M8 14 70 2,890
Item code Type DN INCH PN MPa A mm ⌀A mm ⌀A/QC mm B mm ⌀B mm B1 mm b mm C mm C-BSPP C RF mm C RTJ mm C1 mm Cavity L mm Cavity L1 mm C-D ch mm CH1 mm CS D mm D1 mm d mm ⌀d mm ØD mm Ød1 mm ⌀d/QC mm E mm ⌀E mm ⌀E linea mm E1 mm E2 mm E3 mm E4 mm E5 mm E6 mm E7 mm E8 mm E9 mm ES.V mm F mm F1 mm Flow max l/min Flow min-max l/min G mm ⌀G mm ⌀G* mm G1 mm H mm ⌀H mm H1 mm HEX mm I mm I1 mm ISO5211 J mm K mm ⌀K mm ⌀K* mm n°⌀K mm ⌀K1 mm L mm L1 mm L2 mm L3 mm L4 mm LSCH80 mm ⌀LW mm ⌀LW1 mm M mm ⌀M mm ØM1 mm N mm ⌀N mm O-ring P mm ⌀P mm Pilot Ratio Pressure cracking MPa Pressure max MPa Pressure max peak MPa Pressure max rotating MPa Pressure max static MPa Pressure max woking MPa Q mm ⌀Q mm R mm ⌀R mm ⌀RA mm S mm ⌀S mm Setting range MPa Setting standard MPa SW mm SW1 mm T mm ⌀T mm U mm V mm V1 - V2 C1 - C2GAS - MET W mm W* mm W1 mm W2 mm Weight kg X mm X* mm ⌀X mm X1 mm X-BSPP Y mm ⌀Y mm Y1 mm ⌀z mm
G590B02A2P01TAA GE2 SAE4 6 50 57 24.5 73 44 11 71.3 49 F05 10 7/16 UNF M6 9 50 0,505
G590B03A2P01TAA GE2 SAE6 10 50 57 24.5 73 44 11 71.3 49 F05 10 9/16 UNF M6 9 50 0,744
G590B04A2P01TAA GE2 SAE8 13 50 57 23.5 81 48 11 71.3 49 F05 13 3/4 UNF M6 9 50 1,238
G590B05A2P01RAA GE2 SAE12 20 42 65 27 98 62 14 83.7 55 F05 20 1 1/16 UNF M6 14 50 1,818
G590B06A2P01PAA GE2 SAE16 25 42 75 33.5 106 66 14 93.6 65 F05 25 1 5/16 UNF M6 14 50 2,323
G590B07R2P01PAA GE2 SAE20R 25 35 75 33.5 127 66 14 93.6 65 F05 25 1 5/8 UNF M6 14 50 2,573
G590B07A2P01PAA GE2 SAE20 32 35 87 40.75 127 83 14 93.6 80 F07 32 1 5/8 UNF M8 14 70 2,890
disegno tecnico Gemels
DIN/ISO 228 BSP - WITH ACTUATOR DOUBLE ACTING
Item code Type DN INCH PN MPa A mm ⌀A mm ⌀A/QC mm B mm ⌀B mm B1 mm b mm C mm C-BSPP C RF mm C RTJ mm C1 mm Cavity L mm Cavity L1 mm C-D ch mm CH1 mm CS D mm D1 mm d mm ⌀d mm ØD mm Ød1 mm ⌀d/QC mm E mm ⌀E mm ⌀E linea mm E1 mm E2 mm E3 mm E4 mm E5 mm E6 mm E7 mm E8 mm E9 mm ES.V mm F mm F1 mm Flow max l/min Flow min-max l/min G mm ⌀G mm ⌀G* mm G1 mm H mm ⌀H mm H1 mm HEX mm I mm I1 mm ISO5211 J mm K mm ⌀K mm ⌀K* mm n°⌀K mm ⌀K1 mm L mm L1 mm L2 mm L3 mm L4 mm LSCH80 mm ⌀LW mm ⌀LW1 mm M mm ⌀M mm ØM1 mm N mm ⌀N mm O-ring P mm ⌀P mm Pilot Ratio Pressure cracking MPa Pressure max MPa Pressure max peak MPa Pressure max rotating MPa Pressure max static MPa Pressure max woking MPa Q mm ⌀Q mm R mm ⌀R mm ⌀RA mm S mm ⌀S mm Setting range MPa Setting standard MPa SW mm SW1 mm T mm ⌀T mm U mm V mm V1 - V2 C1 - C2GAS - MET W mm W* mm W1 mm W2 mm Weight kg X mm X* mm ⌀X mm X1 mm X-BSPP Y mm ⌀Y mm Y1 mm ⌀z mm
GE2 HC G 1/4 CS DA_NA GE2 G 1/4 6 50 57 24.5 73 44 187 40 49 112 209 F05 90 10 G 1/4 M6 9 50 1.113
GE2 HC G 3/8 CS DA_NA GE2 G 3/8 10 50 57 24.5 73 44 187 40 49 112 209 F05 90 10 G 3/8 M6 9 50 1,0610
GE2 HC G 1/2 CS DA_NA GE2 G 1/2 13 50 57 23.5 81 48 187 40 49 112 209 F05 90 13 G 1/2 M6 9 50 1.187
GE2 HC G 3/4 CS DA_NA GE2 G 3/4 20 42 65 27 98 62 206 40 55 143 248 F05 113 20 G 3/4 M6 14 50 1,9350
GE2 HC G 1 CS DA_NA GE2 G 1 25 42 75 33.5 106 66 206 40 65 143 258 F05 113 25 G 1 M6 14 50 2.787
GE2 HC G 1 1/4 R CS DA_NA GE2 G 1 1/4 R 25 35 75 33.5 127 66 206 40 65 143 258 F05 113 25 G 1/4 M6 14 50 4.768
GE2 HC G 1 1/4 CS DA_NA GE2 G 1 1/4 32 35 87 40.75 127 83 218 40 80 165 292 F07 136.7 32 G 1/4 M8 14 70 4.933
Item code Type DN INCH PN MPa A mm ⌀A mm ⌀A/QC mm B mm ⌀B mm B1 mm b mm C mm C-BSPP C RF mm C RTJ mm C1 mm Cavity L mm Cavity L1 mm C-D ch mm CH1 mm CS D mm D1 mm d mm ⌀d mm ØD mm Ød1 mm ⌀d/QC mm E mm ⌀E mm ⌀E linea mm E1 mm E2 mm E3 mm E4 mm E5 mm E6 mm E7 mm E8 mm E9 mm ES.V mm F mm F1 mm Flow max l/min Flow min-max l/min G mm ⌀G mm ⌀G* mm G1 mm H mm ⌀H mm H1 mm HEX mm I mm I1 mm ISO5211 J mm K mm ⌀K mm ⌀K* mm n°⌀K mm ⌀K1 mm L mm L1 mm L2 mm L3 mm L4 mm LSCH80 mm ⌀LW mm ⌀LW1 mm M mm ⌀M mm ØM1 mm N mm ⌀N mm O-ring P mm ⌀P mm Pilot Ratio Pressure cracking MPa Pressure max MPa Pressure max peak MPa Pressure max rotating MPa Pressure max static MPa Pressure max woking MPa Q mm ⌀Q mm R mm ⌀R mm ⌀RA mm S mm ⌀S mm Setting range MPa Setting standard MPa SW mm SW1 mm T mm ⌀T mm U mm V mm V1 - V2 C1 - C2GAS - MET W mm W* mm W1 mm W2 mm Weight kg X mm X* mm ⌀X mm X1 mm X-BSPP Y mm ⌀Y mm Y1 mm ⌀z mm
GE2 HC G 1/4 SS DA_NA GE2 G 1/4 6 50 57 24.5 73 44 187 40 49 112 209 F05 90 10 G 1/4 M6 9 50 1.113
GE2 HC G 3/8 SS DA_NA GE2 G 3/8 10 50 57 24.5 73 44 187 40 49 112 209 F05 90 10 G 3/8 M6 9 50 1,0610
GE2 HC G 1/2 SS DA_NA GE2 G 1/2 13 50 57 23.5 81 48 187 40 49 112 209 F05 90 13 G 1/2 M6 9 50 1.187
GE2 HC G 3/4 SS DA_NA GE2 G 3/4 20 42 65 27 98 62 206 40 55 143 248 F05 113 20 G 3/4 M6 14 50 1,9350
GE2 HC G 1 SS DA_NA GE2 G 1 25 42 75 33.5 106 66 206 40 65 143 258 F05 113 25 G 1 M6 14 50 2.787
GE2 HC G 1 1/4 R SS DA_NA GE2 G 1 1/4 R 25 35 75 33.5 127 66 206 40 65 143 258 F05 113 25 G 1/4 M6 14 50 4.768
GE2 HC G 1 1/4 SS DA_NA GE2 G 1 1/4 32 35 87 40.75 127 83 218 40 80 165 292 F07 136.7 32 G 1/4 M8 14 70 4.933
disegno tecnico Gemels
ANSI/ASME B1.20.1 NPT -WITH ACTUATOR DOUBLE ACTING
Item code Type DN INCH PN MPa A mm ⌀A mm ⌀A/QC mm B mm ⌀B mm B1 mm b mm C mm C-BSPP C RF mm C RTJ mm C1 mm Cavity L mm Cavity L1 mm C-D ch mm CH1 mm CS D mm D1 mm d mm ⌀d mm ØD mm Ød1 mm ⌀d/QC mm E mm ⌀E mm ⌀E linea mm E1 mm E2 mm E3 mm E4 mm E5 mm E6 mm E7 mm E8 mm E9 mm ES.V mm F mm F1 mm Flow max l/min Flow min-max l/min G mm ⌀G mm ⌀G* mm G1 mm H mm ⌀H mm H1 mm HEX mm I mm I1 mm ISO5211 J mm K mm ⌀K mm ⌀K* mm n°⌀K mm ⌀K1 mm L mm L1 mm L2 mm L3 mm L4 mm LSCH80 mm ⌀LW mm ⌀LW1 mm M mm ⌀M mm ØM1 mm N mm ⌀N mm O-ring P mm ⌀P mm Pilot Ratio Pressure cracking MPa Pressure max MPa Pressure max peak MPa Pressure max rotating MPa Pressure max static MPa Pressure max woking MPa Q mm ⌀Q mm R mm ⌀R mm ⌀RA mm S mm ⌀S mm Setting range MPa Setting standard MPa SW mm SW1 mm T mm ⌀T mm U mm V mm V1 - V2 C1 - C2GAS - MET W mm W* mm W1 mm W2 mm Weight kg X mm X* mm ⌀X mm X1 mm X-BSPP Y mm ⌀Y mm Y1 mm ⌀z mm
GE2 HC N 1/4 CS DA_NA GE2 N 1/4 6 50 57 24.5 73 44 187 40 49 112 209 F05 90 10 N 1/4 M6 9 50 1.113
GE2 HC N 3/8 CS DA_NA GE2 N 3/8 10 50 57 24.5 73 44 187 40 49 112 209 F05 90 10 N 3/8 M6 9 50 1,2100
GE2 HC N 1/2 CS DA_NA GE2 N 1/2 13 50 57 23.5 81 48 187 40 49 112 209 F05 90 13 N 1/2 M6 9 50 1.184
GE2 HC N 3/4 CS DA_NA GE2 N 3/4 20 42 65 27 98 62 206 40 55 143 248 F05 113 20 N 3/4 M6 14 50 2.04
GE2 HC N 1 CS DA_NA GE2 N 1 25 42 75 33.5 106 66 206 40 65 143 258 F05 113 25 N 1 M6 14 50 3.08
GE2 HC N 1 1/4 R CS DA_NA GE2 N 1 1/4 R 25 35 75 33.5 127 66 206 40 65 143 258 F05 113 25 N 1/4 M6 14 50 3.08
GE2 HC N 1 1/4 CS DA_NA GE2 N 1 1/4 32 35 87 40.75 127 83 218 40 80 165 292 F07 136.7 32 N 1/4 M8 14 70 4.933
Item code Type DN INCH PN MPa A mm ⌀A mm ⌀A/QC mm B mm ⌀B mm B1 mm b mm C mm C-BSPP C RF mm C RTJ mm C1 mm Cavity L mm Cavity L1 mm C-D ch mm CH1 mm CS D mm D1 mm d mm ⌀d mm ØD mm Ød1 mm ⌀d/QC mm E mm ⌀E mm ⌀E linea mm E1 mm E2 mm E3 mm E4 mm E5 mm E6 mm E7 mm E8 mm E9 mm ES.V mm F mm F1 mm Flow max l/min Flow min-max l/min G mm ⌀G mm ⌀G* mm G1 mm H mm ⌀H mm H1 mm HEX mm I mm I1 mm ISO5211 J mm K mm ⌀K mm ⌀K* mm n°⌀K mm ⌀K1 mm L mm L1 mm L2 mm L3 mm L4 mm LSCH80 mm ⌀LW mm ⌀LW1 mm M mm ⌀M mm ØM1 mm N mm ⌀N mm O-ring P mm ⌀P mm Pilot Ratio Pressure cracking MPa Pressure max MPa Pressure max peak MPa Pressure max rotating MPa Pressure max static MPa Pressure max woking MPa Q mm ⌀Q mm R mm ⌀R mm ⌀RA mm S mm ⌀S mm Setting range MPa Setting standard MPa SW mm SW1 mm T mm ⌀T mm U mm V mm V1 - V2 C1 - C2GAS - MET W mm W* mm W1 mm W2 mm Weight kg X mm X* mm ⌀X mm X1 mm X-BSPP Y mm ⌀Y mm Y1 mm ⌀z mm
GE2 HC N 1/4 SS DA_NA GE2 N 1/4 6 50 57 24.5 73 44 187 40 49 112 209 F05 90 10 N 1/4 M6 9 50 1.113
GE2 HC N 3/8 SS DA_NA GE2 N 3/8 10 50 57 24.5 73 44 187 40 49 112 209 F05 90 10 N 3/8 M6 9 50 1,2100
GE2 HC 1/2 SS DA_NA GE2 N 1/2 13 50 57 23.5 81 48 187 40 49 112 209 F05 90 13 N 1/2 M6 9 50 1.184
GE2 HC N 3/4 SS DA_NA GE2 N 3/4 20 42 65 27 98 62 206 40 55 143 248 F05 113 20 N 3/4 M6 14 50 2.04
GE2 HC N 1 SS DA_NA GE2 N 1 25 42 75 33.5 106 66 206 40 65 143 258 F05 113 25 N 1 M6 14 50 3.08
GE2 HC N 1 1/4 R SS DA_NA GE2 N 1 1/4 R 25 35 75 33.5 127 66 206 40 65 143 258 F05 113 25 N 1/4 M6 14 50 3.08
GE2 HC N 1 1/4 SS DA_NA GE2 N 1 1/4 32 35 87 40.75 127 83 218 40 80 165 292 F07 136.7 32 N 1/4 M8 14 70 4.933
disegno tecnico Gemels
SAE J1926-1 - WITH ACTUATOR DOUBLE ACTING
Item code Type DN INCH PN MPa A mm ⌀A mm ⌀A/QC mm B mm ⌀B mm B1 mm b mm C mm C-BSPP C RF mm C RTJ mm C1 mm Cavity L mm Cavity L1 mm C-D ch mm CH1 mm CS D mm D1 mm d mm ⌀d mm ØD mm Ød1 mm ⌀d/QC mm E mm ⌀E mm ⌀E linea mm E1 mm E2 mm E3 mm E4 mm E5 mm E6 mm E7 mm E8 mm E9 mm ES.V mm F mm F1 mm Flow max l/min Flow min-max l/min G mm ⌀G mm ⌀G* mm G1 mm H mm ⌀H mm H1 mm HEX mm I mm I1 mm ISO5211 J mm K mm ⌀K mm ⌀K* mm n°⌀K mm ⌀K1 mm L mm L1 mm L2 mm L3 mm L4 mm LSCH80 mm ⌀LW mm ⌀LW1 mm M mm ⌀M mm ØM1 mm N mm ⌀N mm O-ring P mm ⌀P mm Pilot Ratio Pressure cracking MPa Pressure max MPa Pressure max peak MPa Pressure max rotating MPa Pressure max static MPa Pressure max woking MPa Q mm ⌀Q mm R mm ⌀R mm ⌀RA mm S mm ⌀S mm Setting range MPa Setting standard MPa SW mm SW1 mm T mm ⌀T mm U mm V mm V1 - V2 C1 - C2GAS - MET W mm W* mm W1 mm W2 mm Weight kg X mm X* mm ⌀X mm X1 mm X-BSPP Y mm ⌀Y mm Y1 mm ⌀z mm
GE2 HC SAE4 CS DA_NA GE2 SAE4 6 50 57 24.5 73 44 187 40 49 112 209 F05 90 10 7/16 UNF M6 9 50 1.113
GE2 HC SAE6 CS DA_NA GE2 SAE6 10 50 57 24.5 73 44 187 40 49 112 209 F05 90 10 9/16 UNF M6 9 50 1,2100
GE2 HC SAE8 CS DA_NA GE2 SAE8 13 50 57 23.5 81 48 187 40 49 112 209 F05 90 13 3/4 UNF M6 9 50 1.187
GE2 HC SAE12 CS DA_NA GE2 SAE12 20 42 65 27 98 62 206 40 55 143 248 F05 113 20 1 1/16 UNF M6 14 50 1,9350
GE2 HC SAE16 CS DA_NA GE2 SAE16 25 42 75 33.5 106 66 206 40 65 143 258 F05 113 25 1 5/16 UNF M6 14 50 2.787
GE2 HC SAE20 R CS DA_NA GE2 SAE20R 25 35 75 33.5 127 66 206 40 65 143 258 F05 113 25 1 5/8 UNF M6 14 50 4.768
GE2 HC SAE20 CS DA_NA GE2 SAE20 32 35 87 40.75 127 83 218 40 80 165 292 F07 136.7 32 1 5/8 UNF M8 14 70 4.934
Item code Type DN INCH PN MPa A mm ⌀A mm ⌀A/QC mm B mm ⌀B mm B1 mm b mm C mm C-BSPP C RF mm C RTJ mm C1 mm Cavity L mm Cavity L1 mm C-D ch mm CH1 mm CS D mm D1 mm d mm ⌀d mm ØD mm Ød1 mm ⌀d/QC mm E mm ⌀E mm ⌀E linea mm E1 mm E2 mm E3 mm E4 mm E5 mm E6 mm E7 mm E8 mm E9 mm ES.V mm F mm F1 mm Flow max l/min Flow min-max l/min G mm ⌀G mm ⌀G* mm G1 mm H mm ⌀H mm H1 mm HEX mm I mm I1 mm ISO5211 J mm K mm ⌀K mm ⌀K* mm n°⌀K mm ⌀K1 mm L mm L1 mm L2 mm L3 mm L4 mm LSCH80 mm ⌀LW mm ⌀LW1 mm M mm ⌀M mm ØM1 mm N mm ⌀N mm O-ring P mm ⌀P mm Pilot Ratio Pressure cracking MPa Pressure max MPa Pressure max peak MPa Pressure max rotating MPa Pressure max static MPa Pressure max woking MPa Q mm ⌀Q mm R mm ⌀R mm ⌀RA mm S mm ⌀S mm Setting range MPa Setting standard MPa SW mm SW1 mm T mm ⌀T mm U mm V mm V1 - V2 C1 - C2GAS - MET W mm W* mm W1 mm W2 mm Weight kg X mm X* mm ⌀X mm X1 mm X-BSPP Y mm ⌀Y mm Y1 mm ⌀z mm
GE2 HC SAE4 SS DA_NA GE2 SAE4 6 50 57 24.5 73 44 187 40 49 112 209 F05 90 10 7/16 UNF M6 9 50 1.113
GE2 HC SAE6 SS DA_NA GE2 SAE6 10 50 57 24.5 73 44 187 40 49 112 209 F05 90 10 9/16 UNF M6 9 50 1,2100
GE2 HC SAE8 SS DA_NA GE2 SAE8 13 50 57 23.5 81 48 187 40 49 112 209 F05 90 13 3/4 UNF M6 9 50 1.187
GE2 HC SAE12 SS DA_NA GE2 SAE12 20 42 65 27 98 62 206 40 55 143 248 F05 113 20 1 1/16 UNF M6 14 50 1,9350
GE2 HC SAE16 SS DA_NA GE2 SAE16 25 42 75 33.5 106 66 206 40 65 143 258 F05 113 25 1 5/16 UNF M6 14 50 2.787
GE2 HC SAE20 R SS DA_NA GE2 SAE20R 25 35 75 33.5 127 66 206 40 65 143 258 F05 113 25 1 5/8 UNF M6 14 50 4.768
GE2 HC SAE20 SS DA_NA GE2 SAE20 32 35 87 40.75 127 83 218 40 80 165 292 F07 136.7 32 1 5/8 UNF M8 14 70 4.934
disegno tecnico Gemels
DIN/ISO 228 BSP - WITH ACTUATOR SPRING RETURN
Item code Type DN INCH PN MPa A mm ⌀A mm ⌀A/QC mm B mm ⌀B mm B1 mm b mm C mm C-BSPP C RF mm C RTJ mm C1 mm Cavity L mm Cavity L1 mm C-D ch mm CH1 mm CS D mm D1 mm d mm ⌀d mm ØD mm Ød1 mm ⌀d/QC mm E mm ⌀E mm ⌀E linea mm E1 mm E2 mm E3 mm E4 mm E5 mm E6 mm E7 mm E8 mm E9 mm ES.V mm F mm F1 mm Flow max l/min Flow min-max l/min G mm ⌀G mm ⌀G* mm G1 mm H mm ⌀H mm H1 mm HEX mm I mm I1 mm ISO5211 J mm K mm ⌀K mm ⌀K* mm n°⌀K mm ⌀K1 mm L mm L1 mm L2 mm L3 mm L4 mm LSCH80 mm ⌀LW mm ⌀LW1 mm M mm ⌀M mm ØM1 mm N mm ⌀N mm O-ring P mm ⌀P mm Pilot Ratio Pressure cracking MPa Pressure max MPa Pressure max peak MPa Pressure max rotating MPa Pressure max static MPa Pressure max woking MPa Q mm ⌀Q mm R mm ⌀R mm ⌀RA mm S mm ⌀S mm Setting range MPa Setting standard MPa SW mm SW1 mm T mm ⌀T mm U mm V mm V1 - V2 C1 - C2GAS - MET W mm W* mm W1 mm W2 mm Weight kg X mm X* mm ⌀X mm X1 mm X-BSPP Y mm ⌀Y mm Y1 mm ⌀z mm
GE2 HC G 1/4 CS SR_NC GE2 HC G 1/4 6 50 57 24.5 73 44 231 40 49 89.6 186,6 F05 80.6 10 G 1/4 M6 9 50 1.113
GE2 HC G 3/8 CS SR_NC GE2 HC G 3/8 10 50 57 24.5 73 44 231 40 49 89.6 186,6 F05 80.6 10 G 3/8 M6 9 50 1,0610
GE2 HC G 1/2 CS SR_NC GE2 HC G 1/2 13 50 57 23.5 81 48 231 40 49 89.6 186,6 F05 80.6 13 G 1/2 M6 9 50 1.187
GE2 HC G 3/4 CS SR_NC GE2 HC G 3/4 20 40 65 27 98 62 300 40 55 105 210 F05 96 20 G 3/4 M6 14 50 1,9350
GE2 HC G 1 CS SR_NC GE2 HC G 1 25 35 75 33.5 106 66 300 40 65 105 220 F05 96 25 G 1 M6 14 50 2.787
GE2 HC G 1 1/4 R CS SR_NC GE2 HC G 1 1/4 R 25 35 75 33.5 127 66 300 40 65 105 220 F05 96 25 G1 1/4 M6 14 50 4.768
GE2 HC G1 1/4 CS SR_NC GE2 HC G 1 1/4 32 35 87 40.75 127 83 410 40 80 135 262 F07 131 32 G1 1/4 M8 14 70 4.933
Item code Type DN INCH PN MPa A mm ⌀A mm ⌀A/QC mm B mm ⌀B mm B1 mm b mm C mm C-BSPP C RF mm C RTJ mm C1 mm Cavity L mm Cavity L1 mm C-D ch mm CH1 mm CS D mm D1 mm d mm ⌀d mm ØD mm Ød1 mm ⌀d/QC mm E mm ⌀E mm ⌀E linea mm E1 mm E2 mm E3 mm E4 mm E5 mm E6 mm E7 mm E8 mm E9 mm ES.V mm F mm F1 mm Flow max l/min Flow min-max l/min G mm ⌀G mm ⌀G* mm G1 mm H mm ⌀H mm H1 mm HEX mm I mm I1 mm ISO5211 J mm K mm ⌀K mm ⌀K* mm n°⌀K mm ⌀K1 mm L mm L1 mm L2 mm L3 mm L4 mm LSCH80 mm ⌀LW mm ⌀LW1 mm M mm ⌀M mm ØM1 mm N mm ⌀N mm O-ring P mm ⌀P mm Pilot Ratio Pressure cracking MPa Pressure max MPa Pressure max peak MPa Pressure max rotating MPa Pressure max static MPa Pressure max woking MPa Q mm ⌀Q mm R mm ⌀R mm ⌀RA mm S mm ⌀S mm Setting range MPa Setting standard MPa SW mm SW1 mm T mm ⌀T mm U mm V mm V1 - V2 C1 - C2GAS - MET W mm W* mm W1 mm W2 mm Weight kg X mm X* mm ⌀X mm X1 mm X-BSPP Y mm ⌀Y mm Y1 mm ⌀z mm
GE2 HC G 1/4 SS SR_NC GE2 HC G 1/4 6 50 57 24.5 73 44 231 40 49 89.6 186,6 F05 80.6 10 G 1/4 M6 9 50 1.113
GE2 HC G 3/8 SS SR_NC GE2 HC G 3/8 10 50 57 24.5 73 44 231 40 49 89.6 186,6 F05 80.6 10 G 3/8 M6 9 50 1,0610
GE2 HC G 1/2 SS SR_NC GE2 HC G 1/2 13 50 57 23.5 81 48 231 40 49 89.6 186,6 F05 80.6 13 G 1/2 M6 9 50 1.187
GE2 HC G 3/4 SS SR_NC GE2 HC G 3/4 20 40 65 27 98 62 300 40 55 105 210 F05 96 20 G 3/4 M6 14 50 1,9350
GE2 HC G 1 SS SR_NC GE2 HC G 1 25 35 75 33.5 106 66 300 40 65 105 220 F05 96 25 G 1 M6 14 50 2.787
GE2 HC G 1 1/4 R SS SR_NC GE2 HC G 1 1/4 R 25 35 75 33.5 127 66 300 40 65 105 220 F05 96 25 G1 1/4 M6 14 50 4.768
GE2 HC G1 1/4 SS SR_NC GE2 HC G 1 1/4 32 35 87 40.75 127 83 410 40 80 135 262 F07 131 32 G1 1/4 M8 14 70 4.933
disegno tecnico Gemels
ANSI/ASME B1.20.1 NPT - WITH ACTUATOR SPRING RETURN
Item code Type DN INCH PN MPa A mm ⌀A mm ⌀A/QC mm B mm ⌀B mm B1 mm b mm C mm C-BSPP C RF mm C RTJ mm C1 mm Cavity L mm Cavity L1 mm C-D ch mm CH1 mm CS D mm D1 mm d mm ⌀d mm ØD mm Ød1 mm ⌀d/QC mm E mm ⌀E mm ⌀E linea mm E1 mm E2 mm E3 mm E4 mm E5 mm E6 mm E7 mm E8 mm E9 mm ES.V mm F mm F1 mm Flow max l/min Flow min-max l/min G mm ⌀G mm ⌀G* mm G1 mm H mm ⌀H mm H1 mm HEX mm I mm I1 mm ISO5211 J mm K mm ⌀K mm ⌀K* mm n°⌀K mm ⌀K1 mm L mm L1 mm L2 mm L3 mm L4 mm LSCH80 mm ⌀LW mm ⌀LW1 mm M mm ⌀M mm ØM1 mm N mm ⌀N mm O-ring P mm ⌀P mm Pilot Ratio Pressure cracking MPa Pressure max MPa Pressure max peak MPa Pressure max rotating MPa Pressure max static MPa Pressure max woking MPa Q mm ⌀Q mm R mm ⌀R mm ⌀RA mm S mm ⌀S mm Setting range MPa Setting standard MPa SW mm SW1 mm T mm ⌀T mm U mm V mm V1 - V2 C1 - C2GAS - MET W mm W* mm W1 mm W2 mm Weight kg X mm X* mm ⌀X mm X1 mm X-BSPP Y mm ⌀Y mm Y1 mm ⌀z mm
GE2 HC N 1/4 CS SR_NC GE2 HC N 1/4 6 50 57 24.5 73 44 231 40 49 89.6 186,6 F05 80.6 10 N 1/4 M6 9 50 1.113
GE2 HC N 3/8 CS SR_NC GE2 HC N 3/8 10 50 57 24.5 73 44 231 40 49 89.6 186,6 F05 80.6 10 N 3/8 M6 9 50 1,2100
GE2 HC N 1/2 CS SR_NC GE2 HC N 1/2 13 50 57 23.5 81 48 231 40 49 89.6 186,6 F05 80.6 13 N 1/2 M6 9 50 1.184
GE2 HC N 3/4 CS SR_NC GE2 HC N 3/4 20 40 65 27 98 62 300 40 55 105 210 F05 96 20 N 3/4 M6 14 50 2.04
GE2 HC N 1 CS SR_NC GE2 HC N 1 25 35 75 33.5 106 66 300 40 65 105 220 F05 96 25 N 1 M6 14 50 3.08
GE2 HC N1 1/4 R CS SR_NC GE2 HC N1 1/4 R 25 35 75 33.5 127 66 300 40 65 105 220 F05 96 25 N1 1/4 M6 14 50 3.08
GE2 HC N1 1/4 CS SR_NC GE2 HC N1 1/4 32 35 87 40.75 127 83 410 40 80 135 262 F07 131 32 N1 1/4 M8 14 70 4.933
Item code Type DN INCH PN MPa A mm ⌀A mm ⌀A/QC mm B mm ⌀B mm B1 mm b mm C mm C-BSPP C RF mm C RTJ mm C1 mm Cavity L mm Cavity L1 mm C-D ch mm CH1 mm CS D mm D1 mm d mm ⌀d mm ØD mm Ød1 mm ⌀d/QC mm E mm ⌀E mm ⌀E linea mm E1 mm E2 mm E3 mm E4 mm E5 mm E6 mm E7 mm E8 mm E9 mm ES.V mm F mm F1 mm Flow max l/min Flow min-max l/min G mm ⌀G mm ⌀G* mm G1 mm H mm ⌀H mm H1 mm HEX mm I mm I1 mm ISO5211 J mm K mm ⌀K mm ⌀K* mm n°⌀K mm ⌀K1 mm L mm L1 mm L2 mm L3 mm L4 mm LSCH80 mm ⌀LW mm ⌀LW1 mm M mm ⌀M mm ØM1 mm N mm ⌀N mm O-ring P mm ⌀P mm Pilot Ratio Pressure cracking MPa Pressure max MPa Pressure max peak MPa Pressure max rotating MPa Pressure max static MPa Pressure max woking MPa Q mm ⌀Q mm R mm ⌀R mm ⌀RA mm S mm ⌀S mm Setting range MPa Setting standard MPa SW mm SW1 mm T mm ⌀T mm U mm V mm V1 - V2 C1 - C2GAS - MET W mm W* mm W1 mm W2 mm Weight kg X mm X* mm ⌀X mm X1 mm X-BSPP Y mm ⌀Y mm Y1 mm ⌀z mm
GE2 HC N 1/4 SS SR_NC GE2 HC N 1/4 6 50 57 24.5 73 44 231 40 49 89.6 186,6 F05 80.6 10 N 1/4 M6 9 50 1.113
GE2 HC N 3/8 SS SR_NC GE2 HC N 3/8 10 50 57 24.5 73 44 231 40 49 89.6 186,6 F05 80.6 10 N 3/8 M6 9 50 1,2100
GE2 HC N 1/2 SS SR_NC GE2 HC N 1/2 13 50 57 23.5 81 48 231 40 49 89.6 186,6 F05 80.6 13 N 1/2 M6 9 50 1.184
GE2 HC N 3/4 SS SR_NC GE2 HC N 3/4 20 40 65 27 98 62 300 40 55 105 210 F05 96 20 N 3/4 M6 14 50 2.04
GE2 HC N 1 SS SR_NC GE2 HC N 1 25 35 75 33.5 106 66 300 40 65 105 220 F05 96 25 N 1 M6 14 50 3.08
GE2 HC N1 1/4 R SS SR_NC GE2 HC N1 1/4 R 25 35 75 33.5 127 66 300 40 65 105 220 F05 96 25 N1 1/4 M6 14 50 3.08
GE2 HC N1 1/4 SS SR_NC GE2 HC N1 1/4 32 35 87 40.75 127 83 410 40 80 135 262 F07 131 32 N1 1/4 M8 14 70 4.933
disegno tecnico Gemels
SAE J1926-1 - WITH ACTUATOR SPRING RETURN
Item code Type DN INCH PN MPa A mm ⌀A mm ⌀A/QC mm B mm ⌀B mm B1 mm b mm C mm C-BSPP C RF mm C RTJ mm C1 mm Cavity L mm Cavity L1 mm C-D ch mm CH1 mm CS D mm D1 mm d mm ⌀d mm ØD mm Ød1 mm ⌀d/QC mm E mm ⌀E mm ⌀E linea mm E1 mm E2 mm E3 mm E4 mm E5 mm E6 mm E7 mm E8 mm E9 mm ES.V mm F mm F1 mm Flow max l/min Flow min-max l/min G mm ⌀G mm ⌀G* mm G1 mm H mm ⌀H mm H1 mm HEX mm I mm I1 mm ISO5211 J mm K mm ⌀K mm ⌀K* mm n°⌀K mm ⌀K1 mm L mm L1 mm L2 mm L3 mm L4 mm LSCH80 mm ⌀LW mm ⌀LW1 mm M mm ⌀M mm ØM1 mm N mm ⌀N mm O-ring P mm ⌀P mm Pilot Ratio Pressure cracking MPa Pressure max MPa Pressure max peak MPa Pressure max rotating MPa Pressure max static MPa Pressure max woking MPa Q mm ⌀Q mm R mm ⌀R mm ⌀RA mm S mm ⌀S mm Setting range MPa Setting standard MPa SW mm SW1 mm T mm ⌀T mm U mm V mm V1 - V2 C1 - C2GAS - MET W mm W* mm W1 mm W2 mm Weight kg X mm X* mm ⌀X mm X1 mm X-BSPP Y mm ⌀Y mm Y1 mm ⌀z mm
GE2 HC SAE4 CS SR_NC GE2 HC SAE4 6 50 57 24.5 73 44 231 40 49 89.6 186,6 F05 80.6 10 7/16 UNF M6 9 50 1.113
GE2 HC SAE6 CS SR_NC GE2 HC SAE6 10 50 57 24.5 73 44 231 40 49 89.6 186,6 F05 80.6 10 9/16 UNF M6 9 50 1,2100
GE2 HC SAE8 CS SR_NC GE2 HC SAE8 13 50 57 23.5 81 48 231 40 49 89.6 186,6 F05 80.6 13 3/4 UNF M6 9 50 1.187
GE2 HC SAE12 CS SR_NC GE2 HC SAE12 20 40 65 27 98 62 300 40 55 105 210 F05 96 20 1 1/16 UNF M6 14 50 1,9350
GE2 HC SAE16 CS SR_NC GE2 HC SAE16 25 35 75 33.5 106 66 300 40 65 105 220 F05 96 25 1 5/16 UNF M6 14 50 2.787
GE2 HC SAE20 R CS SR_NC GE2 HC SAE20R 25 35 75 33.5 127 66 300 40 65 105 220 F05 96 25 1 5/8 UNF M6 14 50 4.768
GE2 HC SAE20 CS SR_NC GE2 HC SAE20 32 35 87 40.75 127 83 410 40 80 135 262 F07 131 32 1 5/8 UNF M8 14 70 4.934
Item code Type DN INCH PN MPa A mm ⌀A mm ⌀A/QC mm B mm ⌀B mm B1 mm b mm C mm C-BSPP C RF mm C RTJ mm C1 mm Cavity L mm Cavity L1 mm C-D ch mm CH1 mm CS D mm D1 mm d mm ⌀d mm ØD mm Ød1 mm ⌀d/QC mm E mm ⌀E mm ⌀E linea mm E1 mm E2 mm E3 mm E4 mm E5 mm E6 mm E7 mm E8 mm E9 mm ES.V mm F mm F1 mm Flow max l/min Flow min-max l/min G mm ⌀G mm ⌀G* mm G1 mm H mm ⌀H mm H1 mm HEX mm I mm I1 mm ISO5211 J mm K mm ⌀K mm ⌀K* mm n°⌀K mm ⌀K1 mm L mm L1 mm L2 mm L3 mm L4 mm LSCH80 mm ⌀LW mm ⌀LW1 mm M mm ⌀M mm ØM1 mm N mm ⌀N mm O-ring P mm ⌀P mm Pilot Ratio Pressure cracking MPa Pressure max MPa Pressure max peak MPa Pressure max rotating MPa Pressure max static MPa Pressure max woking MPa Q mm ⌀Q mm R mm ⌀R mm ⌀RA mm S mm ⌀S mm Setting range MPa Setting standard MPa SW mm SW1 mm T mm ⌀T mm U mm V mm V1 - V2 C1 - C2GAS - MET W mm W* mm W1 mm W2 mm Weight kg X mm X* mm ⌀X mm X1 mm X-BSPP Y mm ⌀Y mm Y1 mm ⌀z mm
GE2 HC SAE4 SS SR_NC GE2 HC SAE4 6 50 57 24.5 73 44 231 40 49 89.6 186,6 F05 80.6 10 7/16 UNF M6 9 50 1.113
GE2 HC SAE6 SS SR_NC GE2 HC SAE6 10 50 57 24.5 73 44 231 40 49 89.6 186,6 F05 80.6 10 9/16 UNF M6 9 50 1,2100
GE2 HC SAE8 SS SR_NC GE2 HC SAE8 13 50 57 23.5 81 48 231 40 49 89.6 186,6 F05 80.6 13 3/4 UNF M6 9 50 1.187
GE2 HC SAE12 SS SR_NC GE2 HC SAE12 20 40 65 27 98 62 300 40 55 105 210 F05 96 20 1 1/16 UNF M6 14 50 1,9350
GE2 HC SAE16 SS SR_NC GE2 HC SAE16 25 35 75 33.5 106 66 300 40 65 105 220 F05 96 25 1 5/16 UNF M6 14 50 2.787
GE2 HC SAE20 R SS SR_NC GE2 HC SAE20R 25 35 75 33.5 127 66 300 40 65 105 220 F05 96 25 1 5/8 UNF M6 14 50 4.768
GE2 HC SAE20 SS SR_NC GE2 HC SAE20 32 35 87 40.75 127 83 410 40 80 135 262 F07 131 32 1 5/8 UNF M8 14 70 4.934
disegno tecnico Gemels
valvole certificate ATEX ATmosphere EXplosive
CE ATEX

The CE certification ATEX (ATmosphere EXplosive) regulates equipment used in areas with an explosive atmosphere in the EU.

valvole certificate CE
CE PED

The CE PED certification (Pressure Equipment Directive) regulates the design, manufacture, equipment and conformity assessment of pressure equipment ensuring a high level of safety in the EU.

valvole certificate EAC EurAsian Conformity
EAC

The EAC certificates and declarations (EurAsian Conformity) demonstrates that products conform to all technical regulations of the Eurasian Customs Union, particularly referring to pressure equipment, those used in areas with an explosive atmosphere and machines.

certificazione UKCA
UKCA

The UKCA PER certification (UK Conformity Assessed Pressure Equipment Regulation) regulates the design, manufacture, equipment and conformity assessment of pressure equipment ensuring a high level of safety in the United Kingdom.

GE2 HC

DATASHEET
pdf ( 1.57 MB )

Request Information

Information Request

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
E-mail*
Termini e condizioni*
Informazioni commerciali
This site is protected by reCAPTCHA and the Privacy Policy and Terms of use from Google.
Back to Valves