Back to Valves Information Request

Ball valves for the CNG sector

GE3HC

High cycle 3-way ball valve for CNG

High cyclicity (1,000,000 cycles)

GE3HC series ball valves are engineered as an advanced solution for 3-way high pressure applications and high cyclic operation, specifically designed for the CNG, hydrogen, and high-demand industrial sectors. Built for intensive use, they ensure continuous operation and maximum reliability even in harsh environments.

Manufactured in carbon steel or stainless steel and designed to operate up to PN500, GE3HC valves are ideal for gas distribution systems, energy & hydrogen applications, advanced automotive systems, car wash installations, and street cleaning equipment. The 3-way high pressure configuration enables flexible flow management in complex circuits.

Compared to standard 3-way valves, the GE3HC series is optimized for high cyclic performance, offering extended service life and reduced maintenance.

This range is ideal for applications requiring continuous reliability, high sealing performance, and efficient management of technical fluids in energy and industrial environments.

Datasheet

Carbon Steel
Type 3-way ball valve, high cycle life
Dimensions from DN10 to DN25
Technical details BSP-NPT-SAE
Pressure up to PN500
Temperature range from -20°C to +100°C
Stainless Steel
Type 3-way ball valve, high cycle life
Dimensions from DN10 to DN25
Technical details BSP-NPT-SAE
Pressure up to PN500
Temperature range from -30°C to +100°C

General features

*On request

  • Pneumatic actuator
  • Electric actuator
pdf ( 1.03 MB )
Esploso componenti valvola a sfera 3 vie alta ciclicità
POS Description Q.ty Carbon Steel Stainless Steel
1 Body 1 1,0737 1,4404
2 Adapter 2 1,0460 1,4404
3 Ball 1 1,4404 1,4404
4 Stem 1 1,4542 1,4542
5 Ball seat 2 PA612G PA612G
6 Washer 1 1,0116 1,0116
7 Upper Bushing 1 POM - A1000 POM - A1000
8 Lower Bushing 1 POM - A1000 POM - A1000
9 Seeger 1 1,4301 1,4301
10 Adapter o-ring 2 NBR NBR
11 Stem o-ring 1 NBR NBR
12 Stem o-ring 1 (DN10-23) / - (DN20-25-32) NBR NBR
13 Stem Back-up 1 PTFE PTFE
14 Stem Back-up 1 (DN10-23) / - (DN20-25-32) PTFE PTFE
15 Stem quad-ring 1 NBR NBR
16 Closure gasket 2 GRAPHITE GRAPHITE
17 Screws 8 ISO 4017 8.8 ISO 4017 8.8
18 Caps 3 PVC PVC
19 Actuator 1 N/A N/A
20 Connector 1 1,0737 1,0737
21 Joint 1 1,0737 1,0737
22 Pin 1 1,0737 1,4404
DIN/ISO 228 BSP
Item code Type DN INCH PN MPa A mm ⌀A mm ⌀A/QC mm B mm ⌀B mm B1 mm b mm C mm C-BSPP C RF mm C RTJ mm C1 mm Cavity L mm Cavity L1 mm C-D ch mm CH1 mm CS D mm D1 mm d mm ⌀d mm ØD mm Ød1 mm ⌀d/QC mm E mm ⌀E mm ⌀E linea mm E1 mm E2 mm E3 mm E4 mm E5 mm E6 mm E7 mm E8 mm E9 mm ES.V mm F mm F1 mm Flow max l/min Flow min-max l/min G mm ⌀G mm ⌀G* mm G1 mm H mm ⌀H mm H1 mm HEX mm I mm I1 mm ISO5211 J mm K mm ⌀K mm ⌀K* mm n°⌀K mm ⌀K1 mm L mm L1 mm L2 mm L3 mm L4 mm LSCH80 mm ⌀LW mm ⌀LW1 mm M mm ⌀M mm ØM1 mm N mm ⌀N mm O-ring P mm ⌀P mm Pilot Ratio Pressure cracking MPa Pressure max MPa Pressure max peak MPa Pressure max rotating MPa Pressure max static MPa Pressure max woking MPa Q mm ⌀Q mm R mm ⌀R mm ⌀RA mm S mm ⌀S mm Setting range MPa Setting standard MPa SW mm SW1 mm T mm ⌀T mm U mm V mm V1 - V2 C1 - C2GAS - MET W mm W* mm W1 mm W2 mm Weight kg X mm X* mm ⌀X mm X1 mm X-BSPP Y mm ⌀Y mm Y1 mm ⌀z mm
G610203A1301TAA GE3 G 3/8 10 50 57 24.5 73 44 11 71.3 49 68.5 F05 10 G 3/8 M6 9 50 0,8
G610204A1301TAA GE3 G 1/2 13 50 57 23.5 81 48 11 71.3 49 70.5 F05 13 G 1/2 M6 9 50 1,318
G610205A1301TAA GE3 G 3/4 20 40 65 27 98 62 14 83.7 55 85 F05 20 G 3/4 M6 14 50 2
G610206A1301TAA GE3 G 1/2 25 35 75 33.5 106 66 14 93.6 65 97.5 F05 25 G1 M6 14 50 2,572
Item code Type DN INCH PN MPa A mm ⌀A mm ⌀A/QC mm B mm ⌀B mm B1 mm b mm C mm C-BSPP C RF mm C RTJ mm C1 mm Cavity L mm Cavity L1 mm C-D ch mm CH1 mm CS D mm D1 mm d mm ⌀d mm ØD mm Ød1 mm ⌀d/QC mm E mm ⌀E mm ⌀E linea mm E1 mm E2 mm E3 mm E4 mm E5 mm E6 mm E7 mm E8 mm E9 mm ES.V mm F mm F1 mm Flow max l/min Flow min-max l/min G mm ⌀G mm ⌀G* mm G1 mm H mm ⌀H mm H1 mm HEX mm I mm I1 mm ISO5211 J mm K mm ⌀K mm ⌀K* mm n°⌀K mm ⌀K1 mm L mm L1 mm L2 mm L3 mm L4 mm LSCH80 mm ⌀LW mm ⌀LW1 mm M mm ⌀M mm ØM1 mm N mm ⌀N mm O-ring P mm ⌀P mm Pilot Ratio Pressure cracking MPa Pressure max MPa Pressure max peak MPa Pressure max rotating MPa Pressure max static MPa Pressure max woking MPa Q mm ⌀Q mm R mm ⌀R mm ⌀RA mm S mm ⌀S mm Setting range MPa Setting standard MPa SW mm SW1 mm T mm ⌀T mm U mm V mm V1 - V2 C1 - C2GAS - MET W mm W* mm W1 mm W2 mm Weight kg X mm X* mm ⌀X mm X1 mm X-BSPP Y mm ⌀Y mm Y1 mm ⌀z mm
G590203A2P01TAA GE3 G 3/8 10 50 57 24.5 73 44 11 71.3 49 68.5 F05 10 G 3/8 M6 9 50 0,8
G590204A2P01TAA GE3 G 1/2 13 50 57 23.5 81 48 11 71.3 49 70.5 F05 13 G 1/2 M6 9 50 1,318
G590205A2P01TAA GE3 G 3/4 20 40 65 27 98 62 14 83.7 55 85 F05 20 G 3/4 M6 14 50 2
G590206A2P01TAA GE3 G 1/2 25 35 75 33.5 106 66 14 93.6 65 97.5 F05 25 G1 M6 14 50 2,572
disegno tecnico Gemels
ANSI/ASME B1.20.1 NPT
Item code Type DN INCH PN MPa A mm ⌀A mm ⌀A/QC mm B mm ⌀B mm B1 mm b mm C mm C-BSPP C RF mm C RTJ mm C1 mm Cavity L mm Cavity L1 mm C-D ch mm CH1 mm CS D mm D1 mm d mm ⌀d mm ØD mm Ød1 mm ⌀d/QC mm E mm ⌀E mm ⌀E linea mm E1 mm E2 mm E3 mm E4 mm E5 mm E6 mm E7 mm E8 mm E9 mm ES.V mm F mm F1 mm Flow max l/min Flow min-max l/min G mm ⌀G mm ⌀G* mm G1 mm H mm ⌀H mm H1 mm HEX mm I mm I1 mm ISO5211 J mm K mm ⌀K mm ⌀K* mm n°⌀K mm ⌀K1 mm L mm L1 mm L2 mm L3 mm L4 mm LSCH80 mm ⌀LW mm ⌀LW1 mm M mm ⌀M mm ØM1 mm N mm ⌀N mm O-ring P mm ⌀P mm Pilot Ratio Pressure cracking MPa Pressure max MPa Pressure max peak MPa Pressure max rotating MPa Pressure max static MPa Pressure max woking MPa Q mm ⌀Q mm R mm ⌀R mm ⌀RA mm S mm ⌀S mm Setting range MPa Setting standard MPa SW mm SW1 mm T mm ⌀T mm U mm V mm V1 - V2 C1 - C2GAS - MET W mm W* mm W1 mm W2 mm Weight kg X mm X* mm ⌀X mm X1 mm X-BSPP Y mm ⌀Y mm Y1 mm ⌀z mm
G610903A1301TAA GE3 N 3/8 10 50 57 24.5 73 44 11 71.3 49 68.5 F05 10 N 3/8 M6 9 50 0,8
G610904A1301TAA GE3 N 1/2 13 50 57 23.5 81 48 11 71.3 49 70.5 F05 13 N 1/2 M6 9 50 1,318
G610905A1301TAA GE3 N 3/4 20 40 65 27 98 62 14 83.7 55 85 F05 20 N 3/4 M6 14 50 2
G610906A1301TAA GE3 N 1 25 35 75 33.5 106 66 14 93.6 65 97.5 F05 25 N1 M6 14 50 2,572
Item code Type DN INCH PN MPa A mm ⌀A mm ⌀A/QC mm B mm ⌀B mm B1 mm b mm C mm C-BSPP C RF mm C RTJ mm C1 mm Cavity L mm Cavity L1 mm C-D ch mm CH1 mm CS D mm D1 mm d mm ⌀d mm ØD mm Ød1 mm ⌀d/QC mm E mm ⌀E mm ⌀E linea mm E1 mm E2 mm E3 mm E4 mm E5 mm E6 mm E7 mm E8 mm E9 mm ES.V mm F mm F1 mm Flow max l/min Flow min-max l/min G mm ⌀G mm ⌀G* mm G1 mm H mm ⌀H mm H1 mm HEX mm I mm I1 mm ISO5211 J mm K mm ⌀K mm ⌀K* mm n°⌀K mm ⌀K1 mm L mm L1 mm L2 mm L3 mm L4 mm LSCH80 mm ⌀LW mm ⌀LW1 mm M mm ⌀M mm ØM1 mm N mm ⌀N mm O-ring P mm ⌀P mm Pilot Ratio Pressure cracking MPa Pressure max MPa Pressure max peak MPa Pressure max rotating MPa Pressure max static MPa Pressure max woking MPa Q mm ⌀Q mm R mm ⌀R mm ⌀RA mm S mm ⌀S mm Setting range MPa Setting standard MPa SW mm SW1 mm T mm ⌀T mm U mm V mm V1 - V2 C1 - C2GAS - MET W mm W* mm W1 mm W2 mm Weight kg X mm X* mm ⌀X mm X1 mm X-BSPP Y mm ⌀Y mm Y1 mm ⌀z mm
G610903A2P01TAA GE3 N 3/8 10 50 57 24.5 73 44 11 71.3 49 68.5 F05 10 N 3/8 M6 9 50 0,8
G610904A2P01TAA GE3 N 1/2 13 50 57 23.5 81 48 11 71.3 49 70.5 F05 13 N 1/2 M6 9 50 1,318
G610905A2P01TAA GE3 N 3/4 20 40 65 27 98 62 14 83.7 55 85 F05 20 N 3/4 M6 14 50 2
G610906A2P01TAA GE3 N 1 25 35 75 33.5 106 66 14 93.6 65 97.5 F05 25 N1 M6 14 50 2,572
disegno tecnico Gemels
SAE J1926-1
Item code Type DN INCH PN MPa A mm ⌀A mm ⌀A/QC mm B mm ⌀B mm B1 mm b mm C mm C-BSPP C RF mm C RTJ mm C1 mm Cavity L mm Cavity L1 mm C-D ch mm CH1 mm CS D mm D1 mm d mm ⌀d mm ØD mm Ød1 mm ⌀d/QC mm E mm ⌀E mm ⌀E linea mm E1 mm E2 mm E3 mm E4 mm E5 mm E6 mm E7 mm E8 mm E9 mm ES.V mm F mm F1 mm Flow max l/min Flow min-max l/min G mm ⌀G mm ⌀G* mm G1 mm H mm ⌀H mm H1 mm HEX mm I mm I1 mm ISO5211 J mm K mm ⌀K mm ⌀K* mm n°⌀K mm ⌀K1 mm L mm L1 mm L2 mm L3 mm L4 mm LSCH80 mm ⌀LW mm ⌀LW1 mm M mm ⌀M mm ØM1 mm N mm ⌀N mm O-ring P mm ⌀P mm Pilot Ratio Pressure cracking MPa Pressure max MPa Pressure max peak MPa Pressure max rotating MPa Pressure max static MPa Pressure max woking MPa Q mm ⌀Q mm R mm ⌀R mm ⌀RA mm S mm ⌀S mm Setting range MPa Setting standard MPa SW mm SW1 mm T mm ⌀T mm U mm V mm V1 - V2 C1 - C2GAS - MET W mm W* mm W1 mm W2 mm Weight kg X mm X* mm ⌀X mm X1 mm X-BSPP Y mm ⌀Y mm Y1 mm ⌀z mm
G610B03A1301TAA GE3 SAE6 10 50 57 24.5 73 44 11 71.3 49 68.5 F05 10 9/16 UNF M6 9 50 0,8
G610B04A1301TAA GE3 SAE8 13 50 57 23.5 81 48 11 71.3 49 70.5 F05 13 3/4 UNF M6 9 50 1,318
G610B05A1301TAA GE3 SAE12 20 40 65 27 98 62 14 83.7 55 85 F05 20 1 1/16 UNF M6 14 50 2
G610B06A1301TAA GE3 SAE16 25 35 75 33.5 106 66 14 93.6 65 97.5 F05 25 1 5/16 UNF M6 14 50 2,572
Item code Type DN INCH PN MPa A mm ⌀A mm ⌀A/QC mm B mm ⌀B mm B1 mm b mm C mm C-BSPP C RF mm C RTJ mm C1 mm Cavity L mm Cavity L1 mm C-D ch mm CH1 mm CS D mm D1 mm d mm ⌀d mm ØD mm Ød1 mm ⌀d/QC mm E mm ⌀E mm ⌀E linea mm E1 mm E2 mm E3 mm E4 mm E5 mm E6 mm E7 mm E8 mm E9 mm ES.V mm F mm F1 mm Flow max l/min Flow min-max l/min G mm ⌀G mm ⌀G* mm G1 mm H mm ⌀H mm H1 mm HEX mm I mm I1 mm ISO5211 J mm K mm ⌀K mm ⌀K* mm n°⌀K mm ⌀K1 mm L mm L1 mm L2 mm L3 mm L4 mm LSCH80 mm ⌀LW mm ⌀LW1 mm M mm ⌀M mm ØM1 mm N mm ⌀N mm O-ring P mm ⌀P mm Pilot Ratio Pressure cracking MPa Pressure max MPa Pressure max peak MPa Pressure max rotating MPa Pressure max static MPa Pressure max woking MPa Q mm ⌀Q mm R mm ⌀R mm ⌀RA mm S mm ⌀S mm Setting range MPa Setting standard MPa SW mm SW1 mm T mm ⌀T mm U mm V mm V1 - V2 C1 - C2GAS - MET W mm W* mm W1 mm W2 mm Weight kg X mm X* mm ⌀X mm X1 mm X-BSPP Y mm ⌀Y mm Y1 mm ⌀z mm
G610B03A2P01TAA GE3 SAE6 10 50 57 24.5 73 44 11 71.3 49 68.5 F05 10 9/16 UNF M6 9 50 0,8
G610B04A2P01TAA GE3 SAE8 13 50 57 23.5 81 48 11 71.3 49 70.5 F05 13 3/4 UNF M6 9 50 1,318
G610B05A2P01TAA GE3 SAE12 20 40 65 27 98 62 14 83.7 55 85 F05 20 1 1/16 UNF M6 14 50 2
G610B06A2P01TAA GE3 SAE16 25 35 75 33.5 106 66 14 93.6 65 97.5 F05 25 1 5/16 UNF M6 14 50 2,572
disegno tecnico Gemels
valvole certificate ATEX ATmosphere EXplosive
CE ATEX

The CE certification ATEX (ATmosphere EXplosive) regulates equipment used in areas with an explosive atmosphere in the EU.

valvole certificate CE
CE PED

The CE PED certification (Pressure Equipment Directive) regulates the design, manufacture, equipment and conformity assessment of pressure equipment ensuring a high level of safety in the EU.

valvole certificate EAC EurAsian Conformity
EAC

The EAC certificates and declarations (EurAsian Conformity) demonstrates that products conform to all technical regulations of the Eurasian Customs Union, particularly referring to pressure equipment, those used in areas with an explosive atmosphere and machines.

certificazione UKCA
UKCA

The UKCA PER certification (UK Conformity Assessed Pressure Equipment Regulation) regulates the design, manufacture, equipment and conformity assessment of pressure equipment ensuring a high level of safety in the United Kingdom.

GE3 HC

DATASHEET
pdf ( 1.03 MB )

Request Information

Information Request

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
E-mail*
Termini e condizioni*
Informazioni commerciali
This site is protected by reCAPTCHA and the Privacy Policy and Terms of use from Google.
Back to Valves